.jpg)
Grout haze, cement and plaster cleaner
Grout haze, cement and plaster cleaner is a specially designed detergent for the removal of grout, grout haze, plaster, rust and cement on hard surfaces
- Great for removing grout haze, plaster, cement and general builder dirt that has built up on your tiles.
- Power rust remover when used neat
- Removes salts and mineral deposits from terracotta and round swimming pools
- Does not tarnish or ruin profiles on aluminium and steel (Trims, cookers, taps, sinks ect)
Grout haze, cement and plaster cleaner is a powerful, easy-to-use solution designed for the quick and efficient removal of grout haze and cement stains. Ideal for eliminating cement residues from newly laid patios, pavers, and tiled surfaces.
This product is perfect for cleaning a variety of surfaces, including porcelain, sandstone, slate, clay-based bricks and pavers, terracotta, quarry tiles, Victorian geometric tiles, granite, and ceramics. It quickly removes cement-based grout haze from newly installed floors and walls.
For best results, apply Grout haze, cement and plaster cleaner at the correct dilution and use with TileMaster 40 and grout remover pad. A more diluted solution may be effective for lighter stains.
Important: This product is not suitable for removing resin-based brush-in compounds or grouts. Avoid using it on acid-sensitive surfaces like limestone or marble.
Available in 1-litre and 5-litre bottles.
Please consult the full instructions and technical data sheet before use. For assistance with selecting the right cleaner or sealer, feel free to contact us.
Directions of use
- Please read the Technical Data Sheet for full instructions.
- Do not use on acid sensitive surfaces like limestone, travertine, marble and cement based surfaces.
- Carry out a test in an inconspicuous area.
- If you find this product is not suitable for use on your project, do not continue to use.
- Typically, this product is applied via the TileMaster 40 machine at a dilution of 1:4. but may be possible to use neat for tough build ups or a lower dilution for very mild contaminations.
- Mask off surrounding varnished, painted the product may encounter.
- Apply to the surface, agitate and rinse away with clean water within a few minutes. Do not allow to dry on the surface.
- Rinse away with Porcelain Cleaner or plenty of clean water and allow to dry.
- Repeat as required.
- When using indoors ventilate the area.
- Safe for children, pets, and wildlife when dry.
- Do not use on acid sensitive surfaces!
- Coverage rates will vary depending on the porosity of the surface, level of soiling & dilution rate.
Highly effective cleaner for the removal of grout hazes, cement and plaster
Grout haze, cement and plaster cleaner is suitable for removing general grout haze & cement staining from acid resistant natural stone, pavers & tiles. This includes sandstones, slate, porcelain, ceramic tiles and clay-based tiles. It can also be used as an efflorescence remover on brickwork, acid resistant natural stone and block pavers. Apply the solution to newly installed patios, driveways and pavers to remove cement residues left from the construction process. After use, always heavily rinse the surface as cement residues will be suspended in the liquid. The rinsing process will ensure any contaminants are removed from the surface. Follow the same process when removing efflorescence from block pavers, natural stone & tiles. Grout haze, cement and plaster cleaner will remove general grout haze left after tiling internal floors or walls. Always rinse the treated surface with clean water after its use. Once the tiles are dry simply buff the surface with a soft cloth, thus removing any remaining contaminants. For heavy contamination of cement or grout, you may wish to use the product neat and/or repeat the process. The solution can be diluted for less severe staining.
Suitable for remaining deposits from all non acid sensitive natural stone
This product is suitable for use on sandstone, slate, porcelain tiles, ceramic tiles, clay-based tiles and clay-based block pavers. Grout haze, cement and plaster cleaner is not to be used on acid sensitive surfaces like marble, travertine, concrete, cement pavers, limestone and terrazzo. Cement residues left on darker stones, like slate, will be very obvious after installation. It will make the surface look pale, patchy and unattractive. Grout haze, cement and plaster cleaner will effectively and easily remove the staining. Once the staining is removed we recommend sealing the surface to protect the stone. Sealing the surface means it will resist water and oil-based staining, ongoing maintenance becomes easier. We have various sealers available to suit any requirement. If you have used a resin-based brush in compound or resin-based grout you may need to use Grout haze, cement and plaster cleaner in conjunction with Stripper and cleaner. This because resin-based compounds often contain an element of cement and resin. The Grout haze, cement and plaster cleaner dissolves the cement & the Stripper and cleaner will break down the resin. Use this products separately, one after the other (not at the same time) Grout haze, cement and plaster cleaner is typically applied undiluted but can be diluted for less severe contaminations. Apply, agitate allow to react and rinse away within a few minutes. *Please note this product is not for the removal of resin based brush in compounds or grouts and should not be used on acid sensitive surfaces like marble and limestone. Stripper and cleaner.is for the removal of resin based grouts and sweep in style compounds. Available in 1 litre and 5 litre bottles. Please read the full instructions & related information contained within the Technical Data Sheet. If you require help choosing a sealer or cleaning product please feel free to contact us on (0161) 444 0377. You can email us at [email protected].
Coverage
Deep cleaning and degreasing – 1:4 – 15sqm
Grout Haze Removal – 1:4 – 15 sqm
